Please check that your smartphone model and operating system are compatible with the cuff:
• iOS App is compatible with iOS 11 or newer.
• Android app is compatible with Android 8 or newer.
• Bluetooth 4.2 or newer
Switch on your Aktiia cuff.
Switch on your Aktiia cuff by toggling the button at the top.
The LED should start blinking blue, signaling that the cuff is ready for pairing.
If the LED does not switch on or if it is red, please charge the cuff. While charging, the LED will be blinking green, once charged steady green. Do not forget to switch on the cuff for charging.
Please unplug the cuff from the power supply to complete this step. The pairing will not work while in charging mode (green LED).
The mobile app will ask you to enable cellular data or WiFi and allow access to Bluetooth.
In case you are using an Android device, you will be required to grant location access as well. This is an Android system requirement to enable a successful Bluetooth connection, Aktiia does not store or use your location information.
Press the “START PAIRING” button on your phone, keeping the cuff and your mobile phone close by. You should be set up in few seconds.
If the pairing failed despite you following the instructions above here are few additional things you can try:
• Switch OFF the cuff;
• Wait 3 seconds, then switch the cuff ON again, making sure the BLUE light is blinking. If the blue led is steady, the cuff is already connected.
• Press the TRY AGAIN button and retry pairing;
• Restart your phone if the problem persists.
If this does not solve the issue, please check if the AKTIIA device is visible in your smartphone Bluetooth Settings and contact our customer support at email@example.com.
Please note that Aktiia device is meant for personal use only and should not be shared.
In case the same Cuff is being paired to two different accounts, t he following message will be displayed:
“Aktiia Cuff is already paired with another user!”
To Unpair the cuff from a previous account you will need to log in Aktiia App with the initial account, go to screen “Devices” and click the 3 little dots next to the cuff to unpair it.